Installation Guide

What You’ll Need:

  • Measuring tape

  • Pencil

  • Spirit level

  • Power drill with appropriate drill bits

  • Wall plugs (if mounting on plaster or brick walls)

  • Screws (suitable for your wall type)

  • Screwdriver

 

 

Safety First!

  1. Make sure the mirror is disconnected from power before installation.

  2. Ensure the wall you’re mounting on can support the weight of the mirror.

  3. Avoid areas with electrical wires or plumbing inside the wall.

 

 

Installation Steps:

  1. Choose the Perfect Spot:

    • Select a sturdy, flat wall for installation.

    • Ensure the mirror will be close to a power outlet.

  2. Mark the Mounting Points:

    • Measure and mark the positions for the hooks on your wall using a pencil.

    • Use a spirit level to ensure your marks are perfectly aligned.

  3. Prepare the Wall:

    • For drywall: You will need specialized plugs for fixing into drywall.

    • For solid walls: Insert wall plugs first.

  4. Drill the Holes:

    • Use a drill bit that matches the size of your screws or wall plugs.

    • Carefully drill into the marked spots.

  5. Secure the Mounting Screws:

    • Insert screws into the wall plugs and leave about 5-10 mm sticking out. This will allow the hooks on the mirror to latch on.

  6. Hang the Mirror:

    • Gently align the hooks on the back of the mirror with the screws on the wall.

    • Lower the mirror onto the screws until it is secure.

  7. Connect the Power:

    • Plug the power cord into a nearby outlet.

    • Test the mirror’s LED and speaker functions.

Important Notes:

  • Do not overtighten screws, as this may damage the mirror or your wall.

  • If mounting on tiled walls, use a tile drill bit to avoid cracking.

  • Always support the mirror securely when lifting it into place.


If you need further assistance, feel free to contact our customer support team at info@lunarglowmirrors.com

Enjoy your new Lunarglow Mirror! 🌙